• 0 Posts
  • 19 Comments
Joined 3 years ago
cake
Cake day: June 30th, 2023

help-circle

  • A few tips off the top of my head, in no particular order:

    • do not allow public access to any of this. It’s not trivial to set up a wireguard tunnel so that you can reach your home network from e.g. your phone or laptop when you’re away, but it’s also not highly complicated. Usually your home Internet router can already get you half way there.

    • if you must have some service available from the public net, it’s better to e.g. host it on a cheap VPS. That way if your things get hacked again (via no fault of your own), your home network is safe.

    • set up automatics updates, at least for minor updates. If you’re fine with waiting for a few days in case an update crashes one of your services, it’s a good idea to just make it all auto update. Crash recovery from a backup is a simpler problem then setting up from scratch because your outdated service got hacked and now attackers own your home server, home router, TV, fridge, LEDs and whatever else is Internet capable at your home.

    • use 2fa for any service you expose to public internet. Minor inconvenience, mitigates or avoids a whole series of errors.

    • document what you’re doing in a simple doc. Can be a simple doc on your next cloud instance, just at a little note/log entry every time you do something. “added robo vacuum cleaner integration to my home assistant. Had to use version 1.2.3 because my robot is an older gen. Password’s on my phone.” helps a lot when something goes wrong later and you forgot what you did.

    • test backup recovery. Just delete everything and see if and how you can get it back. If you’re afraid to do that, you don’t have a backup.

    • simple monitori


  • If the OP has it only reachable via a VPN, that might be good enough, it’s not directly exposed. But otherwise yes.

    Another, more important problem with publicly available home server: they lost their data when their setup was maintained by a professional hoster. According to the OPs words, they themselves “know just enough to be dangerous”.

    Exposing any of this to the public internet wouldn’t be a good idea however you put it.










  • You’re right, I think most of the Western world politics is too dependent on the capital and that is dependent on the US markets. When the entire thing crashes, it’s going to be bad. I’m pretty sure I’ll be among those people affected, I’m in software, working (remotely) for an US firm. That was after recently losing my job due to failed investment. My wife’s job just got “restructured” as well, and it’s the second time in three years as well.

    Not sure how we’ll deal. I should be making plans on what to do when I lose the house and everything else. I kinda know it but I’m not sure what can I do.




  • I would hardly call this dropping a hammer, though. I mean, the article itself says that OpenAI was lobbying for stuff like this.

    For one, I don’t think it’s addressing any of the most troublesome problems. No mention of environmental impact. No mention of societal impact, or economic one. Nobody is addressing the horrible misuse of LLMs in, say education or biases that are built into the LLMs.

    For two, what are the consequences? Sam Altman can go around saying whatever the hell he wants, mislead the government, the public, even their own users. No consequences. They can use bait and switch, no problems. The worst thing they can get is a few million dollars of fines. That’s for the long time been just the cost of doing business.

    It’s a fig leaf law that doesn’t look at any of the worst problems we have but the worst offenders can use it to say “no wait we’re regulated”.




  • First, apologies for the late reply, I forget to check notifications here. On a tangent, it’s a lovely UI since it’s not pestering me to do this or that, but I do miss an occassional reply or two.

    Now, to recap: I have asked you in my post, what software do you have right now? You said the family doesn’t want to sort the library twice - how do they sort this now? You said you host your photo collections on home servers, something something proxmox - the question is how do you get the photos there now? Because you might already have a solution.

    If yes, tell us what your process looks like at the moment, and someone might have an advice. If no, if you have nothing right now, that’s okay too.


  • That really depends on the software you use. Some software might have a way to do it, but it may be indirect.

    E.g. digikam is a photo library management software. It can move albums between “libraries”, and is designed that some of those libraries can be offline occasionally (more in the sense of SD cards, but also e.g. USB storage). So how you could do it is you map one, mountable, library to one disk, another to your “network storage” (however you attach your home server). That includes the metadata (depending on where and how you store it). And the digikam database itself is just a file as well (sqlite database), so you can also back that up at the same time. I’m not sure how to automate this process. Even a manual “cheat” - moving the files to network drive, then symlinking it back, per month or something, might work. It’s a bit of a manual process, but digikam is designed to be storage-based. And a lot of other software is, as well.

    But again, I don’t know if you’re using digiikam or something else, and how you set it up. So, what software do you have? How do your users sync their photos and albums? That might help planning.